Skip to main content

ELOCK DOOR ACCESS CONTROL CONFIGURATION | AXSYS SOFTWARE CONFIGURATION


DOOR ACCESS CONTROL EL-2000R BOARD:



Max. 2 door access for single panel.

Total 5000 cards and 10000 log transaction storage.

128 sets of Time Interval

128 sets of Time Zone setting.

128 sets of Door Access level.

372 sets of holidays setting.

Door’s lock release time ranging from 00 to 99 
seconds.

Door’s open time ranging from 00 to 99 seco
nds.

Support door lock auto release by time zone control.

Support max. 2 doors access mode or 2 car park access mode.

Support Anti-passback auto reset.

Support 10 digits card number reading.







Support 4 system operation mode

Single Door Mode

Two Door Mode

Car Park Mode

Emergency Door Mode

Time Attendance Mode



3 user access operation mode

Card Only

Card & PIN.

Pin Only.


Exit push button with time zone control.

5 facility code setting. (Site Code)



10 sets of local common PIN setting.( 6 digits PIN Code)

Dual Card mode by time zone control. (Buddy Mode)

Support integrated keypad reader via wiegand connection.










Popular posts from this blog

MIDDLE EAST SOFTWARE FOR TIME ATTENDANCE AND ACCESS CONTROL SYSTEM

 MIDDLE EAST SOFTWARE FOR TIME ATTENDANCE AND ACCESS CONTROL SYSTEM you can access your biometric machine or door access control system through this middle east software and you can add/delete users using this software. mainly this middle east software concetrates on time attendance. and you can generate attendance reports of employees,you can track checkin and checkout timings of employees.  Work Flow of the Software   1. Downloads user's fingerprint or the card which have been enrolled in the Device  to software "Connection Device ­Downloads user info and FP"  2. Upload employee's name and other materials which have been modify in Device  in the Employee maintained "Connection Device –Upload user info and FP"  3. Assign Employee to department "enter Department management"  4. Setup Shift Schedule and Timetable "enter Maintenan...

IP VIDEO INTERCOM - Apartment & Segment Setting

  Apartment & Segment Setting   Step 1, IP address check for the indoor monitor, building outdoor station and villa outdoor station, 1) Villa outdoor station IP address check, at the time of charging the power, the villa outdoor station will say the IP address, if no, please reset for factory default. 2) The indoor monitor IP address check, user system--system info 3) The building outdoor station IP address check, password “#666666”-- system info.   Step 2, modify the computer network segment to comply with the outdoor station and indoor monitor, Please enter the below to modify IP address(internet IP protocol 4):   Step 3,   connect the monitor or outdoor station with the computer.   Step 4: Click the “fileclient.exe” and input the outdoor station or monitor IP address to link.     Click the “ verification” to confirm if the link is successful or not.   Step 5, Please click the .txt file to find the apartment number The configuration d...